Unique design fully integrated into the engine with the latest generation Eaton® Twin Vortices System (TVS) roots-type rotor pack. ---The twin four-lobe rotors feature 160-degree twist improves air-handling, noise, and vibration characteristics - Kit includes: -- High flow fuel injectors, single belt drive, and lower heat range iridium-tip spark plugs. -- Water-to-air inter cooler system with a custom low temperature radiator (LTR) -- A new performance air Intake system is included in the kit with a TRD re-useable performance filter, Intake Flow Accelerator and a larger upper air box lid with a filter service gauge. -- 50-State emissions legal. Power: 504hp up from 381hp / torque 550lb-ft up from 401lb-ft. ALL POWER NUMBERS CERTIFIED TO SAE J1349

Note:MAIN ASSEMBLY KIT REQUIRED: PTR29-34070. Installation time is approximately 9 hours with the first installation likely to take longer. Installation instructions are available on TIS.
-- To aid in installation , TRD has developed a hoist mounting bracket that bolts directly onto the supercharger housing lid. The bracket is made from stamped steel and plated to prevent rust (PTR25-34070).
-- Engine calibration reflash is available through TIS using your scan tool or TechStream device. No other special tools or adapters are required.
-- Warranty is the same as other TRD powertrain components: 12 months or 12,000 miles or the balance of the 5 year/60,000 mile new car power train warranty, whichever is greater, when installed by an authorized Toyota dealer. If superchargers installed by anyone other than an authorized Toyota dealer are warranted for 12 months or 12,000 miles. Specific warranty information is included with the supercharger.

• Crank-driven supercharger increases torque and horsepower from idle to redline, delivering immediate throttle response—producing 504 hp @ 5,500 rpm and 550 lb.-ft. torque @ 3,600 rpm (from 381 hp @ 5600 rpm and 401 lb.-ft. torque @ 3600 rpm)
• Integral by-pass valve prevents supercharger from going into boost when driving at a steady state of speed such as on the highway or in light traffic; takes less than ½ hp to operate when by-pass valve is open, helping reduce parasitic drag from the crankshaft
• Self-contained air-to-liquid intercooler gives higher performance, better fuel mileage, improved towing capacity and passing power than non-intercooled
• Gen 6 four-lobe rotor design features a high-twist 180-degree helix for improved efficiency, requiring less power to drive; generates less temperature in boost and is substantially quieter than earlier Gen 5 technology
• Upgraded fuel system includes larger fuel injectors, allowing for proper fuel delivery when using supercharger system at full capacity
• Factory calibration of ECU offers optimal performance and fuel mileage when combined with the increase in torque and horsepower
• Increases towing capacity, acceleration
• Complete kit includes all necessary hardware for factory installed appearance; no cutting, welding or fabrication required for supercharger installation
• Supercharger has self-contained lubrication; virtually no maintenance required on supercharger—or supercharger system components
• Emissions legal in all 50 states

This supercharger is only approved for installation on Gasoline Fueled vehicle applications. No Flex Fuel vehicle applications are approved.

• System takes cool air from behind and below the headlight area (rather than hot air from the engine compartment) to supply the engine with cooler, denser air to increase horsepower and improves cooling
• Designed to work with the factory ECU and emissions system
• Features reusable TRD high flow conical air filter with a custom-calibrated filter service gauge that provides visual indication of when filter needs servicing
• Dyno-tested to deliver an increase in both horsepower and torque for superior acceleration and greater pulling power
• Tested according to Toyota’s stringent performance standards
• Emissions legal in all 50 states

• Kit contents
• Lid - Air Filter
• Inlet Pipe - 4.7L
• Air Filter - TRD Conical
• Intake Flow Accelerator
• Hardware bag - 4.7L

• High-performance, high-friction brake pads are made from an aramid/ceramic-strengthened compound, delivering an optimum combination of cold and hot friction
• Pre-scorched to aid in initial break-in
• Offers excellent price-to-performance ratio in a high-performance street pad
• Anti-squeal shims pre-installed
• Direct replacement for stock pads
• TRD Performance Brake Pads are good for street and autocross use. They are not intended for open track sessions